[ Bottom of Page | Previous Page | Next Page | Contents | Index | Library Home | Legal | Search ]

Commands Reference, Volume 3, i - m

lscondresp Command

Purpose

Lists information about a condition and any of its condition/response associations.

Syntax

To list the link between a condition and one or more responses:

lscondresp [-a | -n] [ -l | -t | -d | -D delimiter ] [-q] [-U] [-x] [-z] [-h] [-TV] [condition[:node_name] [response1 [response2...]]]

To list all of the links to one or more responses:

lscondresp [ -a | -n ] [ -l | -t | -d | -D delimiter] [-q] [-x] [-z] -r [-U] [-h] [-TV] response1[:node_name] [response2...]

Description

The lscondresp command lists information about a condition and its linked responses. A link between a condition and a response is called a condition/response association. The information shows which responses are linked with a condition and whether monitoring is active for a condition and its linked response. The following information is listed:

Field
Description
Condition
The name of the condition linked with a response.
Response
The name of the response linked with the condition.
State
The state of the response for the condition. The state indicates whether a specified response is active or not.
Node
The location of the condition and the response.
Locked
Indicates whether the resource is locked or unlocked.

To list a particular condition and response, specify both the condition and the response. To list all responses to a condition, specify the condition only. To list all conditions to which a response is linked, specify the response and the -r flag. To list all conditions and their linked responses, do not specify any condition or response parameters.

Specifying a node name limits the display to the condition/response associations that are defined on that node. List all of the condition/response associations on a node by specifying a colon (:) followed by the node name. The node name is a node within the management scope determined by the CT_MANAGEMENT_SCOPE environment variable. The management scope determines the list of nodes from which the condition/response associations are listed. For local scope, only condition/response associations on the local node are listed. For management domain scope and peer domain scope, the condition/response associations from all nodes within the domain are listed.

When neither the -a flag nor the -n flag is specified, all selected conditions for the responses are listed. Tabular format is the default.

Flags

-a
Lists only those responses that are active for the condition.
-n
Lists only those responses that are not active for the condition.
-l
Displays the condition information and response information on separate lines (long format).
-t
Displays the condition information and response information in separate columns (table format).
-d
Specifies delimiter-formatted output. The default delimiter is a colon (:). Use the -D flag if you want to change the default delimiter.
-D delimiter
Specifies delimiter-formatted output that uses delimiter. Use this flag to specify something other than the default colon (:). For example, when the data to be displayed contains colons, use this flag to specify another delimiter of one or more characters.
-q
Does not return an error if either the condition or the response does not exist.
-U
Indicates whether the resource is locked.
-x
Suppresses header printing.
-z
Specifies that this command applies to all nodes in the cluster. The cluster scope is determined by the CT_MANAGEMENT_SCOPE environment variable. If it is not set, first the management domain scope is chosen if it exists, then the peer domain scope is chosen if it exists, and then local scope is chosen, until the scope is valid for the command. The command will run once for the first valid scope found. For example, if both a management and peer domain exist, lscondresp -z with CT_MANAGEMENT_SCOPE not set will list the management domain. In this case, to list the peer domain, set CT_MANAGEMENT_SCOPE to 2.
-r
Lists information about all of the condition/response associations for the specified responses. Use this flag to indicate that all command parameters specified are responses, not conditions.
-h
Writes the command's usage statement to standard output.
-T
Writes the command's trace messages to standard error. For your software service organization's use only.
-V
Writes the command's verbose messages to standard output.

Parameters

condition
The condition can be a condition name or a substring of a condition name. When it is a substring, any defined condition name that contains the substring and is linked to the response will be listed.
response1 [response2...]
This parameter can be a response name or a substring of a response name. You can specify more than one response name. When it is a substring, any defined response name that contains the substring and is linked to the condition will be listed.
node_name
Specifies the node where the condition or response is defined. If node_name is not specified, the local node is used. node_name is a node within the scope determined by the CT_MANAGEMENT_SCOPE environment variable.

Security

The user needs read permission for the IBM.Association resource class to run lscondresp. Permissions are specified in the access control list (ACL) file on the contacted system.

Exit Status

0
The command ran successfully.
1
An error occurred with RMC.
2
An error occurred with a command-line interface script.
3
An incorrect flag was entered on the command line.
4
An incorrect parameter was entered on the command line.
5
An error occurred that was based on incorrect command-line input.

Environment Variables

CT_CONTACT
Determines the system where the session with the resource monitoring and control (RMC) daemon occurs. When CT_CONTACT is set to a host name or IP address, the command contacts the RMC daemon on the specified host. If CT_CONTACT is not set, the command contacts the RMC daemon on the local system where the command is being run. The target of the RMC daemon session and the management scope determine the resource classes or resources that are processed.
CT_MANAGEMENT_SCOPE
Determines the management scope that is used for the session with the RMC daemon in processing the resources of the event-response resource manager (ERRM). The management scope determines the set of possible target nodes where the resources can be processed. The valid values are:
0
Specifies local scope.
1
Specifies local scope.
2
Specifies peer domain scope.
3
Specifies management domain scope.

If this environment variable is not set, local scope is used.

Standard Output

When the -h flag is specified, this command's usage statement is written to standard output. All verbose messages are written to standard output.

Standard Error

All trace messages are written to standard error.

Examples

To see which resources are locked, run this command: 

lscondresp -U

The output will look like this: 

Condition             Response                 Node     State         Locked 
"/tmp space used"     "E-mail root off-shift"  "nodeA"  "Not active"  "Yes"  
"Page space in rate"  "E-mail root anytime"    "nodeA"  "Not active"  "No"

These examples apply to standalone systems:

  1. To list all conditions with their linked responses, run this command: 
    lscondresp
    The output will look like this: 
    Condition                 Response                      Node       State         
"FileSystem space used"   "Broadcast event on-shift"    "nodeA"    "Active"      
"FileSystem space used    "E-mail root anytime"         "nodeA"    "Not Active"  
"Page in Rate"            "Log event anytime"           "nodeA"    "Active"
  2. To list information about the condition "FileSystem space used", run this command: 
    lscondresp "FileSystem space used"
    The output will look like this: 
    Condition                 Response                      Node       State  
"FileSystem space used"   "Broadcast event on-shift"    "nodeA"    "Active"     
"FileSystem space used    "E-mail root anytime"         "nodeA"    "Not Active"
  3. To list information about the condition "FileSystem space used" for responses that are active, run this command: 
    lscondresp -a  "FileSystem space used"
    The output will look like this: 
    Condition                 Response                      Node       State  
"FileSystem space used"   "Broadcast event on-shift"    "nodeA"    "Active"
  4. To list information about the condition "FileSystem space used" with the linked response "Broadcast event on-shift", run this command: 
    lscondresp  "FileSystem space used" "Broadcast event on-shift"
    The output will look like this: 
    Condition                 Response                      Node       State  
"FileSystem space used"   "Broadcast event on-shift"    "nodeA"    "Active"
  5. To list all conditions that have the string space in their names with their linked responses, run this command: 
    lscondresp space
    The output will look like this: 
    Condition                 Response                      Node       State  
"FileSystem space used"   "Broadcast event on-shift"    "nodeA"    "Active"       
"FileSystem space used    "E-mail root anytime"         "nodeA"    "Not Active"

These examples apply to management domains:

  1. In this example, the condition "FileSystem space used" is defined on the management server. To list information about "FileSystem space used", run this command on the management server: 
    lscondresp "FileSystem space used"
    The output will look like this: 
    Condition                  Response                     Node       State  
"FileSystem space used"    "Broadcast event on-shift"   "nodeB"    "Active"      
"FileSystem space used"    "E-mail root anytime"        "nodeB"    "Not Active"
  2. In this example, the condition "FileSystem space used" is defined on the managed node nodeC. To list information about "FileSystem space used", run this command on the management server: 
    lscondresp "FileSystem space used":nodeC
    The output will look like this: 
    Condition                  Response                     Node     State  
"FileSystem space used"    "Broadcast event on-shift"   "nodeC"    "Active"       
"FileSystem space used"    "E-mail root anytime"        "nodeC"    "Not Active"

This example applies to a peer domain:

  1. In this example, the condition "FileSystem space used" is defined in the domain. To list information about "FileSystem space used", run this command on one of the nodes in the domain: 
    lscondresp "FileSystem space used"
    The output will look like this: 
    Condition                 Response                      Node       State  
"FileSystem space used"   "Broadcast event on-shift"    "nodeD"    "Active"       
"FileSystem space used"   "E-mail root anytime"         "nodeD"    "Not Active"   
"FileSystem space used"   "Broadcast event on-shift"    "nodeE"    "Active"       
"FileSystem space used"   "E-mail root anytime"         "nodeE"    "Not Active"

Location

/usr/sbin/rsct/bin/lscondresp
Contains the lscondresp command

Related Information

Commands: mkcondition, mkcondresp, mkresponse, rmcondresp, startcondresp, stopcondresp

Files: rmccli

[ Top of Page | Previous Page | Next Page | Contents | Index | Library Home | Legal | Search ]